Monday, February 10, 2014

oh, brother...


as i wrote in a previous post,
i was thrilled when, for Christmas, 
meester berrong gifted me 
with a brother pe770, 
embroidery machine 
i'd been eyeing.

it was a proverbial breeze
to set up and start using.
however,
not so long after doing so, 
i started experiencing 
a few kinks.
(immediately, john told me 
to take it back
and get a bernina,
which his sister has 
and loves.
he went on to say 
he was going to get me 
the bernina for Christmas 
but wasn't sure 
how serious i was about 
embroidering.)
anyway, i worked through 
those first kinks 
with the help of youtube's 
vince arcuri,
who retired from the military 
and took up embroidering 
as a hobby.
if not for vince 
and his experience 
with the brother pe770,
i would have been totally lost 
when i started experiencing issues 
with my machine.

~@~

i embroidered and sewed 
pillows for my front porch 
and monogrammed
a couple of scarves  
experiencing only a glitch 
or two. 
however,
the third scarf was a totally 
different experience.
doing everything the same 
as i'd been doing, 
i hooped my fabric, 
lowered my presser foot, 
and pressed the button 
to start embroiderying.
when it started it seemed fine, 
but about 20 stitches in,
i noticed my embroidery arm 
wasn't moving...

hence, i stopped the process 
and found my machine 
had pulled my fabric 
down into the bobbin
chamber.
my machine was eating 
my scarf!
further, the only way
to get the scarf
(and wad of thread)
out of the chamber
was to cut it:(



hoping it was an isolated 
incident, i took in
a deep breath, 
re-hooped the fabric,
cleaned the machine, 
and
tried again on the other 
end of the scarf.

the same thing happened.

i thought maybe it was 
a fabric issue...
(like, maybe the fabric was too 
delicate or something)

~@~

unfortunately, 
that was not the case.
on friday night
my machine ate
3 of the next 4 
projects i attempted.
so, first thing saturday morning,
i called
to see if i could still 
return it.
the customer service representative 
told me i could...
as i was still under 90 days.
so, that's what i did.

afterwards, john and i went 
to evansville to the bernina store
and ordered a new machine.

~@~

i'm sharing this because 
several of my readers 
and fellow facebook'ers
messaged me about the type 
of machine i was using
and if i was pleased with 
the machine.

the bottom line is 
i would not recommend
the brother pe770!

(when it works,
it's great;
but,
the other 30%
of the time...
not so much:/)

after losing several items 
i had purchased 
to embroider,
i knew it was time to 
invest in a better machine.

~@~

so, stay tuned.
i am supposed to receive 
my bernina
on tuesday.
i hope to report 
a much more positive experience!

love and God's blessings,
dani xxx

No comments:

Post a Comment